Every Dashtech panel is put together from the options below. Not sure what to choose? Tell us where the panel goes and how it will be used, and we will advise.
Six materials, each with its own look and properties. The main difference: on acrylic the engraving sits on the rear, so the front stays smooth and the panel can be backlit; on laminate and metal the engraving is on the front.
Sealed push buttons that switch up to 20 A directly, without relays. For 12 V and 24 V.
Stainless steel 316 for a classic look and salt water, or black anodised aluminium for a modern helm.
Red, green, blue, white or orange. The ring can show whether a circuit is switched on.
Latching for lights and pumps, momentary for horn, windlass, trim or platforms.
Push button and thermal circuit breaker in one housing: 5, 10 or 15 A.
Push buttons with an illuminated symbol of your choice.
Thermal circuit breakers with a reset button, mounted in the panel.
Saves space: switch and protection in one.
Fuse holders accessible from the front.
Blade fuses or breakers in a separate box, pre-wired to the panel.
Text, symbols and lines in any font. Rear engraved on acrylic, so it never wears.
Your logo, boat name or a drawing of your boat engraved and lit in the panel.
Even illumination via a diffuser, matched to the LED rings.
Keep the helm dark at night; optional full blackout.
Switch between colours, for example red at night.
Engraved frames and lines to group functions clearly.
USB-C and USB-A chargers, with or without voltage display.
Panel-mount sockets with waterproof cap.
Voltmeters and tank gauges for fuel, water and waste.
Buzzer and alarm LEDs, for example for a bilge or high-water alarm.
Cut-outs for plotters, displays, radios, engine instruments and controls of any brand.
Blank positions for functions you want to add later.
Choose the level of preparation that suits your project:
All wiring in tinned marine cable, every lead numbered, every panel supplied with its wiring diagram.
All wiring is carried out and connected by experienced marine technical engineers, using certified marine-grade components. It is safe, reliable and every circuit is tested before delivery.
For a backlit panel at the helm, choose Gloss or Matte Acrylic. For working boats or places where the panel takes knocks, Matte Laminate or aluminium. For exposed outdoor positions, stainless steel. We are happy to advise.
Stainless suits classic and wooden interiors and salt water; black suits modern helms and dark panels. Both are IP67 and switch up to 20 A.
Every circuit must be protected. Breakers in the panel are the most convenient: you can reset them at the helm. If you already have a fuse box, we connect to it.
You receive a digital design. On request we can send a photo of a material sample.
Send us your list of functions and the space available, or design it yourself in the configurator.
