Classic vessel
Mari Galante
A wide switch panel with the ship engraved and backlit in red, with gauges for the tanks.
Projects: switch panels & dashboards for boats, yachts and vehicles
Panels built for shipyards, rescue services, private owners and vehicle builders.
This page shows a selection of our projects. We have built many more switch panels and dashboards for owners and shipyards that are not shown here. Feel free to ask for examples for your type of boat.
Which projects are you interested in?
Yachts
Dashboards and switch panels for motor yachts – matched to wooden interiors, high gloss finishes and owners who spend a lot of time on board.
Yacht
Van der Heijden yacht
A dashboard of six separate high-gloss panels matched to the wooden interior, with illuminated switches and the yard name engraved.
Shipyard
Latitude Yachts, Latvia
Panels with engraving in an RAL colour that matches the yacht brand's logo.
Speedboat
HOC, X-Yachts
The owner went back from an iPad and on-board computer to physical switches: a clear panel for lighting, anchor control and pumps.
Speed and console boats
For sports boats, RIBs and console boats: compact, spray-proof panels that stay reliable at speed and through impacts, and work with wet hands.
Rescue
Dutch Lifeboat Association
Panels for the new rescue boats of the Reddingsbrigade Nederland. The layout was defined together with the crews, so every function can be found instantly.
Sports boat
Karnic, deck panel
A compact cockpit panel for a Karnic: swim platform release and up/down, swim steps, sun shade and a USB-C charger with voltage display. Labels and frames backlit in blue, with the builder's logo. Plus the complete dashboard for the Karnic CS10-HT in gloss acrylic with an engraved boat outline.
Shipyard
Rafnar Hellas, Greece
We supply the waterproof switch panels for Rafnar Hellas in Greece: rugged, built to specification and wired in-house.
Fishing boat
Trophy centre console
A custom dashboard across the full width of the console, with switches and gauges.
Console boat
Sessa Key Largo 25
New dashboard for the console of a Sessa Key Largo 25 Open Line – with cut-outs for rev counters and trim gauges, buttons for flaps, anchor, lights and pumps, and a pre-wired fuse block with labelled wires.
Console boat
Boston Whaler 210 Outrage
The matte original panel was replaced by a gloss switch panel with backlit labels and an illuminated Boston Whaler logo – fitting the existing cut-out, with the same functions.
Shipyard
Maasgouw Marine Center, NTRCPTR
Maasgouw Marine Center builds high-end fishing boats in series, so every component has to be durable and look right. We build the panels for the NTRCPTR range in matte acrylic with black anodised push buttons and an illuminated logo.
RIB
Highfield Patrol 540
A panel for a RIB in mattem Acryl with stainless push buttons, built for heavy use on open water.
Yacht
Long Island 28
Replacement for the old six-way switch panel. Same size and mounting holes, now with backlit push buttons, engraved labels and the Long Island script logo.
Speedboat
Scarab, complete dashboard
A completely new dashboard for a boat with twin 525 hp Mercury Racing engines.
Tender
Amore Mio, tender Se7en
The "Se7en" is the tender of the Heesen-built yacht "Amore Mio". This Nor-Tech Monte Carlo received a new, fully custom switch panel in gloss acrylic with black NorTide push buttons.
Shipyard
Nitra Boats, Sweden
We build the panels for the full Nitra Boats range.
Classic racing boat
Fjordling 17 HT
A fully rebuilt classic racing boat, now in service in the United States.
Speedboat
Powerquest
A redesign of thirty-year-old dashboard panels in matte acrylic.
Sloops and tenders
For sloops and tenders: slim panels that blend into the console and teak – with USB chargers and lighting for relaxed evenings on the water.
Shipyard
Maxima 1040
We supply the dashboards for the full Maxima Boats range, including the Maxima 1040.
Shipyard
Maxima 35
Dashboard for the Maxima 35 by Maxima Boats. A gloss-black panel around the chart plotter, with backlit push buttons for every helm function, matched to the boat's design and colour.
Fleet
Davy & Orsted, Amsterdam
Custom panels for a fleet of aluminium boats, with nine anodised stainless switches, backlighting, a 12V socket, dual USB and a digital voltmeter.
Tender
Waterspoor 808
A new panel design for an owner who wanted more than the factory panel.
Fleet
Waterman fleet, Zaandam
Panels for the complete fleet of Waterman aluminium workboats.
Sailing yachts
Sailors want different things from motorboaters – and we understand them, because we sail ourselves. On a sailing yacht every amp-hour counts: days at anchor or under sail mean power from batteries, solar and alternator is carefully rationed. That is why the energy consumption of the panel is a central part of our design.
- Efficient LED lighting in buttons and engraving, dimmable or switchable for night sailing
- No unnecessary standby current – indicators and lighting only where they are really needed
- Battery management in view: isolators, voltage and tank gauges clearly laid out
- Lighting can be switched off (optional): at night, when everything has to be dark, the button lighting can be turned off completely – without the switches losing their function
- Red night lighting on request, to preserve night vision in the cockpit and at the nav station
- 12 V and 230 V sections cleanly separated, for shore power and inverter
Classic vessel
De Marieje
A panel for an 1898 Danish clipper in 5 mm matte acrylic with stainless push buttons, a buzzer and alarm LEDs.
Sailing ship
Sailing ship Hester, Kampen
A galley panel for an 1898 charter ship, with the ship engraved into the rear of the panel.
Sailing yacht
Dufour 29, Scotland
Complete switch panel for a Dufour 29 in Scotland, grouped into lights, electronics, navigation & radio and accessories, with a 12 V socket and engraved yacht outline. Every circuit has its own fuse; the LED rings can be switched off for night sailing without the buttons losing their function.
Sailing yacht
S/Y Atika, Denmark
A large distribution panel in 6 mm matte acrylic with NorTide stainless push buttons.
Sailing yacht
Beneteau
A copy of the original panel dimensions with new switches, breakers and the illuminated Beneteau logo.
Automotive
For trucks, expedition vehicles, motorhomes and sports cars: switch panels and control panels for 12 V and 24 V systems, built to the same standard as our boat panels.
Vehicle
Dreamcatcher expedition truck
Control panel for an expedition truck on a MAN 4x4 chassis. Gloss acrylic with illuminated name, cut-outs for the battery monitor and inverter display, and twelve blue illuminated buttons for pumps, heating, lights and sockets – fitted flush into the bamboo cabinet.
Vehicle
Porsche 911
Compact motorsport-style switch panel for a Porsche 911 – matte black with engraved labels, a red illuminated master switch and six AUX buttons with white LED ring for auxiliary lighting and accessories. Supplied with a pre-made wiring harness.
Vehicle
Trucks, motorhomes and caravans
Panels for trucks, motorhomes and caravans, built to the same standard as our marine work.
Industrial
Control panels and front plates for machines, installations and offices – with the same care in design, wiring and testing.
Industrial
Office control panel
An anodised aluminium panel with stainless 316 switches, supplied pre-wired.
